Nimate artiklov v nakupovalni košarici
The DHR15 is a 2-way bi-amp powered loudspeaker equipped with a 15-inch woofer and a 1.4-inch HF driver, perfect for use as a main speaker. Combining a 1000W amplifier and high-performance DSP with the same plywood construction found on Yamaha’s high-end DZR Series, the DHR15 offers best-in-class sound quality and durability.
• Featuring a plywood cabinet that delivers a clear sound with minimal vibration • Plywood enclosure with a polyurea coating for a robust, scratch resistant surface • Compact size despite the 15-inch LF driver that provides excellent low frequency response • Dual-angle pole sockets offer both 0° or a -7° down tilt • Rigging points for use with eye bolts • Proprietary FIR-X™ tuning, provides FIR filtering and corrective EQ, minimizing phase distortion
• Speaker Type: 2-way, Bi-amped Powered Speaker, Bass-reflex • Frequency Response: 44 Hz - 20 kHz • Coverage Area: H90° x V60° • Crossover: 1.8 kHz: FIR-X tuning (linear phase FIR filter) • Maximum Output Level: 131 dB SPL • LF Diameter: 15" cone • LF Voice Coil: 2.5" • LF Magnet: Ferrite • HF Diaphragm: 1.4" • HF Type: 1" throat compression driver • HF Magnet: Ferrite • Amplifier Class: Class-D • Power Rating: Dynamic: 1000 W (LF: 800 W, HF: 200 W)*, Continuous: 465 W (LF: 400 W, HF: 65 W) • Cooling: Fan cooling, 4 speeds • Power Consumption: 74 W (1/8power), 18 W (Idle) • Power Requirements: 100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 Hz • Bit-Depth: 24-bit • Sample Rate: 48 kHz • Processors: HPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF • Input Connectors: 2 x Combo Jack, 2 x RCA Pin (Unbalanced) • Output Connectors: 1 x CLR3-32 (CH1 Parallel Through or CH1+CH2 Mix) • Cabinet Material: Plywood • Finish: Durable Polyurea Painting, Black • Handles: Side x 2 • Pole Socket: ?35 mm x 2 (Bottom, 0° or -7°) • Rigging: Top x 2, Rear x 1 (Fit for M10 x 30 - 50 mm Eyebolts) • Dimensions: Width: 432 mm, Height: 692 mm, Depth: 405 mm (15.9") • Weight: 24.0 kg