Neumann KH 80 DSP A G

Karakteristike

Free field frequency response ±6 dB     53 Hz … 21 kHz
Free field frequency response ±3 dB     57 Hz … 21 kHz
Max. short term SPL with music material at 2.3 m in typical listening conditions 93 dB(C) SPL
Analog input impedance      14k Ohms
Input gain control (sensitivity)      0 dB ... -15 dB
Output level control (output level in 1 m based on 0 dBu input level)  94; 100; 108; 114 dB SPL
Digital converter: resolution; design     24-bit DAC; ??
Digital converter: sampling rate     48 kHz
Digital internal sampling rate      48 kHz
Dynamic range A-D       114 dB(A)
Latency        2 ms (A-D-A linear phase)
Crossover slope       48 dB/oct; 8th order with phase correction
Protection circuitry       Independent soft clip, peak and thermo limiters for woofer and tweeter; Woofer excursion limiter; thermo limiter for the electronics and amplifiers
Remote control       Neumann.Control software via an RJ45 connector carrying standard IP data
Mains Power Supply: input voltage; frequency    100-240 V; 50/60 Hz
Power consumption (230 V / 100 V): Standby    <330 / <50 mW
Standby        Disabled; 90 mins (default); user defined in software
Cabinet material       Composite polycarbonate
Woofer        100 mm (4") with protecting black metal grille
Tweeter        25 mm (1") with protecting black metal grille
Mounting points       2 x M6 threaded inserts with 70 mm spacing on back panel; thread depth 15 mm (5/8”)
Product dimensions (height x width x depth)    233 x 154 x 194 mm
External net volume       6.7 liters
Product weight       3.5 kg (7 lbs 8 oz)