Trenutno nema proizvoda u košarici.
local_shipping Dostavljamo u United States of AmericaDostava (US / USA 2) 110,03 €
The KH 120 is Neumann's trailblazer model and development yardstick for compact studio monitors. It has been a reference class for close-range monitoring since 2011. Enormous power reserves meet high-precision sound conduction. The result: Maximum signal fidelity and distinctly contoured transients across the entire, neutrally designed frequency response. This enables you to precisely control tonal depth, spatial image and even the smallest details in the mix.
The KH 120 is typically used in near-field applications such as project, music, broadcast and post-production studios for recording, mixing and mastering. It it also available as a digital input “D” version. Latest modeling techniques used to minimize non-linear (harmonic and intermodulation) distortion Low-distortion high frequency reproduction Smoother off -axis response More forgiving of diverse acoustical environments Reduces reflections off the mixing console Damping of break up modes brings low distortion at high sound levels Linear pistonic motor gives a very low harmonic distortion even at high excursions Any KH 120 is “pair matched” to any other KH 120
Free field frequency response ±6 dB 46 Hz … 24 kHz Reproduction accuracy between 100 Hz and 10 kHz: 100%, 80%, 50% of loudspeakers produced ±0.97; ±0.40; ±0.23 dB Max. SPL calc. in half space at 3% THD at 1m (averaged between 100 Hz and 6 kHz) 111.1 dB SPL Max. short term SPL with music material at 2.3 m in typical listening conditions (pair / full range) 97 dB(C) SPL Analog input(s) XLR: analog electronically balanced Analog input impedance 10k Ohms in position 94/108 dB SPL at 1 m; 20k Ohms in position 100/114 dB SPL at 1 m Max. input level +24 dBu Input gain control (sensitivity) 0 dB ... -15 dB Output level control (output level in 1 m based on 0 dBu input level) 94; 100; 108; 114 dB SPL Controller design Analog; active Protection circuitry Independent thermo limiters for woofer, tweeter. Woofer soft clip and excursion limiters. Amplifier overheat. Display: On; Normal Operation Neumann logo “White” Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute Neumann logo “Red” Mains Power Supply: input voltage; frequency 100-240V; 50/60 Hz Cabinet material Aluminium Woofer 130 mm (5.25") magnetically shielded with protecting black metal grille Tweeter 25 mm (1") with protecting black metal grille Mounting points 2 x M8 threaded inserts with 70 mm spacing on back panel; thread depth 15 mm (5/8”) Product dimensions (height x width x depth) 277 x 182 x 220 mm Product weight 6.4 kg
Hrvatski 
Español 
Slovenščina 
Srpski 
Italiano 
Magyar 
Deutsch 
Français 
Bosanski 
English 